Meec tools 027161 - English; Introduction; Product Description; Symbols

27
1 Introduction
1.1 Product description
The product is a battery powered grass trimmer with an
adjustable trimmer head intended to be used to trim grass
and weeds in the garden.
1.2 Symbols
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
WARNING!
Wear ear protection.
Wear safety glasses.
Do not expose the power tool to rain or
moisture.
Watch out for ejected objects.
Keep at a safe distance.
Remove the battery before maintenance or
service.
This product complies with applicable EU
directives and regulations.
Recycle as electrical waste.
Table of contents
1 Introduction 27
1.1 Product description ........................................... 27
1.2 Symbols ................................................................... 27
1.3 Product overview................................................28
2 Safety 28
2.1 Safety definitions ................................................ 28
2.2 General power tool safety warnings ......... 28
2.3 Safety instructions for operation ................29
3 Assembly 30
3.1 To attach the trimmer guard and distance
wheel ........................................................................30
3.2 To attach the front handle ..............................30
4 Operation 30
4.1 To replace the trimmer spool ........................ 30
4.2 To replace the trimmer blades .....................30
4.3 To adjust the front handle ...............................31
4.4 To adjust the telescopic shaft ........................ 31
4.5 To adjust the trimmer angle ...........................31
4.6 To adjust the handle rotation .........................31
4.7 To use the plant protection bar ....................31
4.8 To attach the battery .......................................... 31
4.9 To remove the battery .......................................31
4.10 To operate the product .....................................31
5 Maintenance 31
5.1 To clean the product ..........................................31
6 Storage 31
7 Disposal 31
8 Technical data 32