32
8 Technical data
Specification Value
Voltage 18 VDC
Speed 8500/9000 /min
Cutting width
25 cm spool,
24 cm plastic blade
Line diameter 1.6 mm
Length 123 cm
Weight 1.825 kg
Sound pressure level, LpA 82.1 dB(A), K=3 dB
Measured sound power level,
LwA
92.5 dB(A), K=3 dB
Guaranteed sound power level,
LwA
96 dB(A)
Vibration level
1
3.261 m/s, K=1.5 m/s
Warning! Always wear hearing protection!
Warning! The actual vibration and noise level when
using tools may dier from the specified maximum value,
depending on how the tool is used and the material. It is
therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of
exposure in actual operating conditions (taking into account
all stages of the work cycle, e.g. the time when the tool is
switched o and when it is idling, in addition to the start-up
time).
1 The declared values for vibration and noise,
which have been measured according to a
standardized test method, can be used to
compare dierent tools with each other and for a pre-
liminary assessment of exposure. The measurement
values have been determined in accordance with
EN 50636-2-91:2014.
To Next Page
Loading...
