Meec tools 242130 - TECHNICAL DATA; Specifications Overview

EN
46
TECHNICAL DATA
Nominal Voltage 230 V/50 Hz
Power 1,900 W
Unloaded rpm 4,800 rpm
Saw blade dimensions 254 x 30 x 2.8 mm
Sawing capacity 90° x 90° / 70 x 310mm
45° x 45° / 40 x 210mm
45° x 90° / 40 x 310mm
90° x 45° / 70 x 210mm
Weight 13.4 kg
Sound pressure level, LpA 97 dB(A), K=3 dB
Sound power level, LwA 110 dB(A), K=3 dB
Vibration level 3,8 m/s², K= 1,5 m/s²
Always use hearing protection!
The declared vibration and noise value, which has been measured by a standardised test method, can
be used to compare dierent tools with each other and for a preliminary assessment of exposure. The
measurement values have been determined in accordance with EN 61029-2-9:2012.
WARNING! The actual vibration and noise level when using power tools may dier from the specied
maximum value, depending on how the tool is used and what kind of workpiece is processed. It is
therefore necessary to determine which safety precautions are required to protect the user, based on
an estimate of exposure in actual operating conditions (taking into account all stages of the work
cycle, e.g. the time when the tool is switched o and when it is idling, in addition to the start-up
time).