EN
26
To think about during installation
The outlet pipe must have a diameter at least as large as the outlet port, to reduce the pressure drop
and uid noise.
Correct installation Incorrect installation
USE
Intended use
The pump is designed for water supply for households or machines, pressure boosting, irrigation, etc.
The pump may only be used for the transport of water and other non-corrosive liquids with a low
viscosity. The uid’s pH value must be between 6.5 and 8.5.
NOTE:
The pump can be used in automated systems, together with pressure switches, pressure vessels, etc.
In an automated system, the pump starts when a tap is opened and automatically stops when the tap
is closed. If the pump is used with a water tower, the water tower's upper level switch is used to start
and stop the pump.
To Next Page
Loading...
