3
How to Use this Service Guide
How to Use this Service Guide
This Service Guide is designed for MSI-authorized dealers or service centers. It
provides in-depth illustration of disassembling/assembling the system. Since the
topics in this guide may be related, it is recommended that you read it from cover to
cover first. After that, you may go directly to any specific topic that most meets your
immediate needs.
⚠
Important
All information is subject to change without prior notice. The system photos are
provided for demonstration only. The internal view of your system may vary depending
on the model you purchased.
Necessary Tools
Screwdriver Pliers Tweezers Anti-Static Gloves
Safety Instructions
The following precautions should be observed while handling the product. It is always
suggested that users contact the authorized MSI service center for advanced tech
support if needed.
∙ Refer servicing to qualified personnel only.
∙ Disconnect all power sources and place the product on a steady surface before
disassembly/reassembly.
∙ When unplugging the power cord, always hold the connector part of the cord. Never
pull the cord directly.
∙ Do not place the product in environments subject to mist, smoke, vibration,
excessive dust, salty or greasy air, or other corrosive gases and fumes.
∙ To avoid electrostatic discharge, use an anti-static wrist strap before handling
components. Always handle electrostatic-sensitive components, parts, and
assemblies only at static-free work areas.
∙ Handle components with care. Do not touch the pins or contacts on a component.
∙ Place components on a grounded anti-static pad or on the bed that came with the
components whenever the components are separated from the product.
∙ Do not perform any maintenance with wet hands.
∙ Prevent foreign substances, such as water, other liquids or chemicals, from
entering the product while performing disassembly/reassembly.
To Next Page
Loading...