E.M.C. In accordance with IEC61326 including Amendment No.1
Safety: The instruments meet the safety requirements for double
insulation to IEC 1010-1(1995) EN61010(1995) to installation Category III*,
300 V phase to earth (ground) and 440 V phase to phase, without the need
for separately fused test leads. If required, fused test leads are available as
an optional accessory. *Relates to transient overvoltage likely to be found in
fixed installation wiring.
Weight: 530g (including battery cells)
Dimensions: 195 mm x 98 mm x 40 mm
Cleaning: Wipe with a clean cloth dampened with soapy water or
Isopropyl Alcohol (IPA).
ACCESSORIES PART No.
Supplied: - User Guide 6172-069
- Synthetic zip-up pouch 6420-132
- Test leads, red probe & black
crocodile clip
Optional: - Test lead set 6220-437
Publications ‘AStitch in Time’ AVTM21-P8B
R E PAIR AND WA R R A N T Y
The instrument contains static sensitive devices, and care must be taken in
handling the printed circuit board. If an instrument’s protection has been
impaired it should not be used, but sent for repair by suitably trained and
qualified personnel. The protection is likely to be impaired if for example: it
shows visible damage; fails to perform the intended measurements; has
been subjected to prolonged storage under unfavourable conditions, or has
been subjected to severe transport stresses.
NEW INSTRUMENTS ARE GUARANTEED FOR 3 YEAR’S
FROM THE DATE OF PURCHASE BYTHE USER.
N o t e : Any unauthorized repair or adjustment will automatically
invalidate the Wa r r a n t y
Instrument Repair and Spare Parts
For service requirements for M E G G E R
®
Instruments contact :-
AVO INTERNAT I O N A L
o r AVO INTERNAT I O N A L
A r c h c l i ffe Road Valley Forge Corporate Center
Dover 2621 Van Buren Av e n u e
Kent, CT17 9EN Norristown, PA 1 9 4 0 3
E n g l a n d U . S . A .
Tel: +44 (0) 1304 502243 Tel: +1 (610) 676-8579
Fax: +44 (0) 1304 207342 Fax: +1 (610) 676-8625
or an approved repair company.
To Next Page
Loading...
