Megger DCM305E - Read First; Safety Information

2
megger.com
G Read First
G Safety Information
To ensure safe operation and service of the meter, follow these
instructions.
Failure to observe warnings can result in severe injury or death.
■ Avoid working alone so assistance can be rendered.
■ Do not use the clamp meter if the instrument looks damaged
■ Do not use the clamp meter if the tester is not operating properly or
if it is wet.
■ Use the clamp meter only as specified in the instruction card or the
protection provided by the clamp meter may be impaired.
■ Ensure hands are kept behind the barrier / hand guard when making
measurements.
■ Special precautions are necessary when operating in situations where
exposed live parts at dangerous voltages may be encountered.
Personal protective equipment (not supplied with the instrument)
should be used.
■ Use caution with voltages above 30 V AC RMS, or 60 V DC. These
voltages pose a shock hazard.