Need help?Do you have a question about the Megger DLRO10HD and is the answer not in the manual?
General| Test Current | 10 A |
|---|---|
| Operating Temperature | -20°C to +50°C |
| Resolution | 0.1 µΩ |
| Resistance Range | 0.1 µΩ to 2 kΩ |
| Display | LCD |
| Power Supply | Rechargeable battery or mains power |
| Power Source | Battery |
| Operating Modes | Continuous, Normal, Automatic |
| Interface | USB |
| Safety Rating | CAT III 300 V |
| Storage Temperature | -20°C to +60°C |
| Battery Life | Up to 500 tests per charge |
Ensures safety by using only Megger supplied test leads designed for the instrument.
Highlights the main features and capabilities of the DLRO10HD and DLRO10HDX instruments.
Identifies and describes the physical controls and connection ports on the instrument.
Explains the functions and modes selectable via the instrument's test mode rotary switch.
Details how to select resistance and current ranges using the instrument's range rotary switch.
Outlines the measurement resolution and accuracy specifications for the instrument.
Instructions on how to properly connect test leads to the DLRO10HD/HDX.
Procedure for performing an inductive test, including safety warnings and steps.
Step-by-step guide for conducting a manual bi-directional resistance test.
Instructions for performing an automatic bi-directional resistance test.
Procedure for executing an automatic uni-directional resistance test.
Details the steps required to perform a continuous resistance test.
To Next Page
