To Next PageTo Next Page
Need help?Do you have a question about the Megger DLRO and is the answer not in the manual?
General| Type | Digital Low Resistance Ohmmeter |
|---|---|
| Display | LCD |
| Power Supply | Rechargeable battery or mains power |
| Power Source | Battery |
| Interface | USB |
| Safety Rating | CAT IV 300 V |
| Operating Temperature | 50°C |
| Storage Temperature | -20°C to 60°C |
| Test Current | 10 A, 1 A, 100 mA, 10 mA |
Essential safety information for operating the 10 Ampere DLRO instruments.
Confirms compliance with safety standards and voltage limits.
Details the various controls and connection points on the DLRO instrument.
Covers the battery test meter M1 and the ON/OFF switch S3 for instrument operation.
Describes connection terminals (C1, P1, P2, C2), forward-reverse switch S2, and power connector J2.
Step-by-step guide for operating the DLRO instrument.
Procedure for checking the state of charge of the instrument's rechargeable batteries.
Guidance on connecting the instrument and taking resistance readings.
Techniques for accurate readings below 0.1 mO using forward/reverse readings.
Instructions for charging the instrument's rechargeable batteries.
Describes typical applications for the DLRO instrument.
Details the product warranty and procedures for instrument repair and return.
Safety precautions specific to the 100-Ampere current source and instrument operation.
Operating procedures for the 100-Ampere DLRO range.
Procedure for taking measurements using the 100-Ampere DLRO range.
