AVTM24-1J REV A April 2006
5
Section C
RECEIVING INSTRUCTIONS
READ COMPLETELY BEFORE OPERATING
Your Digital Low Resistance Ohmmeter has been
thoroughly tested and inspected to rigid specifications
before being shipped and is ready for use. Check the
equipment received against the packing list. Notify
Megger, Norristown, PA 19403 of any shortage of
materials. The instrument should be examined for damage
received in transit. If any damage is found, file a claim with
the carrier at once and notify Megger or its nearest
representative giving a detailed description of the damages
observed.
Charge batteries overnight before initial use of instrument.
Refer to Section G for charging procedure. Check for
correct operation of the instrument by connecting it to a
resistor of known value. See Section G, Operating
Procedure.
To Next Page
Loading...
