What to do if Megger Measuring Instruments show 'ERR 115'?
If your Megger Measuring Instruments display 'ERR 115', it could mean that both the main battery module and the backup battery are completely drained. To resolve this, recharge the main battery or replace it with a charged one. Then, switch the instrument on; the calibration constants will be retrieved from EEPROM.
What to do if Megger DLRO-10 show 'ERR 114'?
If your Megger Measuring Instruments display 'ERR 114', return it for recalibration.
What does 'bAtt' mean on Megger DLRO-10 and how to fix it?
If 'bAtt' is displayed on your Megger Measuring Instruments, recharge the main battery or replace it with a charged one.
Guidelines for safely testing inductive loads and potential hazards.
Important safety information regarding intrinsic safety and neck strap.
Explanation of test current, contact fail, voltage, current, and noise indicators.
Overview of DLRO 10X controls, display, and main menu navigation.
Details on 'Noise' and 'C & P' indicator messages for the DLRO 10X.
Information on external voltage and discharge current warnings for the DLRO 10X.
Navigation of DLRO 10X menus including Test, Options, Retrieve, and Display.
Instructions for safely testing inductive loads using the dedicated mode.
Instructions for charging the battery module, including temperature considerations.
Common error messages (bAtt, ERR 114, ERR 115) and required actions.
General| Display | LCD |
|---|---|
| Operating Temperature | -10 °C to +50 °C |
| Test Current | 10 A |
| Power Source | Rechargeable battery |
| Battery Life | Approximately 500 tests per charge |
To Next Page
