What to do if Megger Measuring Instruments show 'ERR 115'?
If your Megger Measuring Instruments display 'ERR 115', it could mean that both the main battery module and the backup battery are completely drained. To resolve this, recharge the main battery or replace it with a charged one. Then, switch the instrument on; the calibration constants will be retrieved from EEPROM.
What to do if Megger Measuring Instruments show 'ERR 114'?
If your Megger Measuring Instruments display 'ERR 114', return it for recalibration.
What does 'bAtt' mean on Megger Measuring Instruments and how to fix it?
If 'bAtt' is displayed on your Megger Measuring Instruments, recharge the main battery or replace it with a charged one.
General| Display | LCD |
|---|---|
| Storage Temperature | -20°C to +60°C |
| Data Storage | Up to 1000 test results |
| Test Current | 10 A |
| Power Supply | Rechargeable battery |
| Operating Temperature | -10°C to +50°C |
| Operating Modes | Continuous |
| Interface | USB |
| Safety Rating | CAT III 600V |
Warns of external voltage and discharge current.
Lists and explains messages displayed for various conditions.
Alerts to dangerous external voltages applied to terminals.
Indicates when an inductive load is still discharging current.
Explains navigation and selection within the instrument's menus.
Performs a single measurement using forward and reverse current.
Measures loads with inductive components, managing stored energy.
Measures using only forward current for faster tests on known sources.
Describes using specific handspikes for measurements.
Explains lead connection for various test configurations.
Details the step-by-step process performed when initiating a test.
Provides instructions and guidelines for charging the battery.
Details the measurement ranges, resolution, and accuracy.
Information on obtaining service and replacement parts.
To Next Page
