Need help?Do you have a question about the Megger DET14C and is the answer not in the manual?
General| Type | Digital Earth Tester |
|---|---|
| Measurement Resolution | 0.01 Ω |
| Accuracy | ±2% ±3 digits |
| Operating Temperature | -10 °C to +50 °C |
| Power Supply | 6 x 1.5 V AA batteries |
| Ingress Protection | IP54 |
| Test Frequency | 128 Hz |
| Display | LCD |
| Safety Standards | EN 61010-1 |
Indicates the document is a user manual for the instrument.
Provides essential safety instructions for operating the instrument correctly.
Emphasizes that the instrument must only be used by trained and competent persons.
Icons indicating safety standards, environmental disposal, and regulatory compliance.
Symbols for measurement cautions, hazardous conditions, and electrical safety categories.
Highlights the main features and advantages offered by the instrument.
Lists additional features exclusive to the DET24C model.
Identification of controls like rotary switch, buttons, and the LCD display.
Description of physical components such as clamp jaws, tactile barriers, lever, and battery cover.
Details of the bottom panel features, including connection ports.
Explanation of various icons and indicators shown on the instrument's display.
Describes the instrument's operating modes selected via the rotary switch.
Details the functions available via buttons during measurement modes.
Explains button functions specific to the setup and configuration mode.
Instructions on how to turn on the instrument and select operational modes.
Step-by-step guide for performing resistance measurements using the clamp.
Step-by-step guide for performing AC current measurements using the clamp.
How to use the HOLD function and save measurement results to memory.
Navigation and options within the function mode for data management and settings.
Instructions for using the display backlight for low-light conditions.
Procedure for accessing and viewing previously saved measurement results.
Methods for removing recorded data from the instrument's memory.
Step-by-step guide for downloading data from the DET24C to a PC.
Procedure for configuring high and low alarm thresholds for resistance measurements.
Procedure for configuring high and low alarm thresholds for current measurements.
Details the performance standards and classifications the instrument meets.
Information on safety standards, measurement categories, and pollution degrees.
Specifies the Electromagnetic Compatibility standards the instrument adheres to.
Conditions affecting measurements and factors causing operational errors.
Detailed specifications for resistance measurements, including ranges and accuracy.
Detailed specifications for AC current measurements, including ranges and accuracy.
Lists the parameters and ranges for setting alarm types (HI/LO) for measurements.
Lists accessories that are included with both the DET14C and DET24C models.
Lists accessories specifically included with the DET24C model.
Provides contact details for obtaining service and spare parts for the instrument.
Lists authorized third-party companies for instrument repair services.
Contact address for returning the instrument to Megger Limited in the UK.
Contact addresses for returning the instrument to Megger in the USA.
Contact address for returning the instrument to Megger SARL in France.
To Next Page
