To Next PageTo Next Page
Need help?Do you have a question about the Megger HSW 3-2 and is the answer not in the manual?
General| Type | High Voltage Test Set |
|---|---|
| Output Power | 2 kVA |
| Frequency Range | 50/60 Hz |
| Input Voltage | 230 V AC |
| Input Frequency | 50/60 Hz |
| Protection Class | IP54 |
| Test Voltage Range | 0 - 3 kV AC |
Lists the high voltage test sets (e.g., HPG XX-AC, HPG XX-H, HPG XX-D) compatible with the HSW 3-2.
Presents the technical specifications of the HSW 3-2, including voltage, frequency, power, dimensions, and weight.
Describes the installation of the HPG XX-AC series, including the HSW 3-2 control unit and transformer connection.
Explains safety terms and operational states as defined by VDE 0104, relating to mains connection and operation.
Guides the user through the steps to safely switch on the device and reach the 'Ready for Operation' state.
Details the procedure to switch the device to 'Ready for HV' state, indicated by the red pilot lamp.
Explains how to increase and select the desired test voltage using the rotary switch and volt meter.
Details the procedure for switching off the control unit manually or via the timer, and protecting against unauthorized switch-on.
