Need help?Do you have a question about the Megger TPT320 and is the answer not in the manual?
General| Display type | LCD |
|---|---|
| Product color | Black, White |
| Built-in display | Yes |
| Quantity per pack | 1 pc(s) |
| Input operation voltage (max) | 690 V |
| Input operation voltage (min) | 12 V |
| International Protection (IP) code | IP64 |
Do not use the instrument in a humid environment.
Check tester accuracy with a known source before and after use.
Handle voltages above 50 V AC / 120 V DC with extreme care.
Operate tester within specified voltage ranges and category ratings.
Keep hands behind barriers and avoid touching probe tips.
Verify instrument is clean, dry, and undamaged.
Avoid using the tester with the battery cap detached.
Refrain from using the tester if any function is not working.
Never use the tester with exhausted or leaked batteries.
Details CAT IV rating, IP64 body, and GS38 shrouds.
Explains the warning for dangerous voltages with low batteries.
Explains how the tester automatically switches on.
Procedure to check battery power by shorting probes.
How to perform a continuity test using LED and buzzer.
How to connect probes for AC/DC voltage measurements.
Procedure for performing a single-pole phase test.
Step-by-step guide for battery replacement.
Details voltage measurement ranges and LED specifications.
Specifies response time, LCD performance, and accuracy.
Lists safety standards, protection ratings, physical size, and weight.
To Next Page
