TPT320 Feature
Operating instructions
Auto-power-on / switching on
The tester switches on when it detects continuity,
an AC or DC voltage above approx. 10 V or a
live phase on L2 (single pole test). It can also be
switched on with the torch light button.
Auto-power off
Tester is automatically powered off after 5 sec
when there is no signal detected by the probes.
The torch light switches off after approx. 10 sec.
GS38
UK tip
Hand
barrier
Remote
probe
1.2 metre probe lead
Battery
cap
Torch
button
Hand
barrier
Display
LED torch
Euro tip
To Next Page
Loading...
