www.megger.com
OTS80PB and OTS60PB OTS100AF, OTS80AF and OTS60AF
27
Operating instructions
8.7. Test results
At the end of any test results are shown on the screen. A typical example shows the
complete on-screen information presented to the user however the screen size is naturally
smaller so a slider function enables the user to navigate through the result and print it if
required.
All screen based test results use only the relevant data to produce statistics i.e. statistics of
mean breakdown voltage, data dispersion, range and standard deviation.
Printing a result can be selected as default or from the PRINT function within the results
window.
To Next Page
Loading...
