Need help?Do you have a question about the Megger S1-568 and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Model | S1-568 |
| Manufacturer | Megger |
| Insulation Resistance Range | 10 kΩ to 15 TΩ |
| Power Supply | Battery |
| Safety Rating | CAT IV 600 V |
| Safety Standards | IEC 61010-1 |
| Type | Insulation Tester |
| Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
| Accuracy | ±5% to ±20% depending on range |
| Display | LCD |
| Battery Type | Lithium-ion |
Detailed safety guidelines for handling, charging, and disposing of the instrument's battery.
Explanation of symbols related to EU directives, UK conformity, and waste disposal.
Overview of the capabilities and specifications of the S1 range insulation resistance testers.
Steps for unpacking, charging, connecting, and performing initial functional checks before operation.
Recommendations for storing the instrument to maintain its condition and battery life.
Guidance on basic instrument operation, using rotary switches, and selecting measurement modes.
Details on breakdown vs. burn modes, voltmeter function, and resetting default instrument settings.
Procedures for setting the instrument's clock, date, lockable voltage, and alarm thresholds.
Instructions for configuring temperature/humidity recording and selecting breakdown/burn modes.
Step-by-step guide for executing insulation tests and applying filter settings for improved accuracy.
Procedures for recalling, deleting, and downloading stored insulation test data.
Information on activating Bluetooth, using real-time output, and managing test data capture.
Guide to downloading, installing, and connecting the S1 testers to the PowerDB management software.
Instructions for using S1 testers with remote control applications and live data streaming via PowerDB.
Detailed instructions for performing Spot IR and Timed IR insulation resistance tests.
Guidance on DAR, PI, Dielectric Discharge, Step Voltage, and Ramp Voltage tests.
Information on how to activate and utilize the instrument's remote control functionality.
Explanation of capacitive, absorption, and leakage currents in insulation resistance measurements.
Techniques for accurate measurements above 100 GΩ and the use of the GUARD terminal.
Guidelines for cleaning the instrument and leads, and general care to ensure longevity.
Procedures for battery charging, care, and replacement, including model-specific instructions.
Detailed electrical specifications, performance characteristics, and environmental operating limits.
Details on product warranty, calibration services, and contact information for support.
Procedures for returning instruments for service and the instrument's declaration of conformity.
List of standard accessories, optional test lead sets, and spare parts available for the S1 range.
To Next Page
