Megger torkel 840 User Manual

TORKEL
820/840/860
User's Manual
Battery Load Units

Megger torkel 840 Specifications

General

Brand	Megger
Model	torkel 840
Category	Measuring Instruments
Language	English

Summary

Safety Precautions and Warnings

Instrument Symbols and Safety Instructions

Explains instrument symbols and critical safety instructions for operation.

Control Panel and Connections

Operator Interface and Controls

Conducting a Battery Discharge Test

Test Setup and Constant Current

Procedures for test preparation and setting constant current.

Setting Limits and Controlling the Test

How to set warning/stop limits and manage test execution.

Constant Power and Resistance Testing

Configuring for Constant Power

Steps to configure TORKEL for constant power discharge tests.

Configuring for Constant Resistance

Steps to configure TORKEL for constant resistance discharge tests.

External Current Measurement

Applications and Setup Overview

Configuration and Ammeter Usage

Steps for external measurement setup and clamp-on ammeter use.

Connections and Troubleshooting

PC Connectivity and TORKEL Win Software

TORKEL Win Program Overview and Features

Software Installation and Communication Setup

Testing and Viewing Results with TORKEL Win

External Start/Stop Control

START/STOP Connector and Usage

Calculating Current and Load Capacity

TORKEL Load Capacity and Calculations

Tables and guidance for TORKEL load limits and current calculations.

Load Capacity Examples and Final Voltage

System Configuration for High Loads

Using Multiple TORKEL and TXL Units

Calculating System Requirements and TXL Specs

System Testing with TORKEL and TXL Units

System Hookup, Settings, and Start

Troubleshooting Common Issues

Display, Breaker, Voltage, and TXL Problems

Solutions for display, F1 breaker, voltage, and TXL connection issues.

Error Messages and Recovery Procedures

Explanations for error messages and procedures for recovery like reset.

Calibration Procedures

Zero Level and Internal Current Calibration

Steps for calibrating zero levels and internal current.

Voltage and External Current Calibration

Steps for calibrating voltage and external current measurements.