Need help?Do you have a question about the Megger TORKEL 930 and is the answer not in the manual?
General| Model | TORKEL 930 |
|---|---|
| Type | Battery Load Unit |
| PC Communication | Yes |
| Communication Interface | USB |
| Display | LCD |
| Cooling | Forced air |
Essential safety precautions and best practices for operating the TORKEL unit safely.
Describes built-in safety features like overheating protection and circuit breaker functions.
Guides users on configuring warning and stop limits for test parameters.
Steps and safety warnings required before initiating a battery test.
Detailed procedure for connecting the TORKEL to the battery terminals.
Explains the function and operation of the emergency stop button for immediate test termination.
Step-by-step guide for performing battery tests at a constant current.
Procedure for conducting battery discharge tests using constant power mode.
Instructions for performing battery tests with a constant resistance load.
Guidance on setting up and executing tests with user-defined load profiles.
Steps to configure the TORKEL for external current measurement using a clamp-on probe.
Explains the TORKEL alarm system, relay contacts, and potential alarm triggers.
Procedure for connecting BVM units and performing tests with TORKEL.
Troubleshooting steps for when the BVM unit fails to initialize with TORKEL.
Resolving issues related to loss of communication between TORKEL and BVM units.
Step-by-step instructions for performing calibration on the TORKEL unit.
To Next Page
