Need help?Do you have a question about the Megger TDR1000/3 and is the answer not in the manual?
Details the physical layout and display elements of the instrument.
Explains the function of the rotary switch for powering on/off and selecting modes.
Outlines the basic steps for performing a test with the instrument.
Explains the different operating modes: Auto, Cursor 1, Cursor 2, and Setup.
Recommends testing cables from both ends for improved accuracy and fault identification.
Provides guidance on cleaning and maintenance, noting no user-serviceable parts.
Step-by-step instructions for replacing the instrument's batteries.
Instructions for returning the product for calibration or repair to service centres.
General| Display | LCD |
|---|---|
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Environmental Protection | IP54 |
| Resolution | 0.1 m |
| Output Impedance | 50 Ω |
| Power Supply | Rechargeable battery |
To Next Page
