What to do if my Megmeet Media Converter shows 'The Current Hall is not Inserted'?
If your Megmeet Media Converter displays 'The Current Hall is not Inserted', check the current hall connector to ensure it is properly connected.
What to do if my Megmeet Dex PM3000 Media Converter encoder fails (DexPM3000)?
If you're experiencing an encoder failure with your DexPM3000 Megmeet Media Converter, check whether the signal terminal of the code disc is firmly connected.
General| Brand | Megmeet |
|---|---|
| Model | Dex PM3000 |
| Category | Media Converter |
| Language | English |
Classification of warning signs and their meanings to ensure safe operation.
Essential safety measures to follow during the installation process.
Comprehensive safety guidelines for operating the welding machine.
Instructions for properly installing and connecting the welder to the electrical supply.
Setting parameters for the arc starting phase of welding.
Accessing and navigating the internal menu for advanced parameter settings.
Interpreting fault indicators and warning lights on the welder panel.
Common fault codes, their causes, and troubleshooting solutions.
To Next Page
