What to do if the MEI Cash Register displays 'Cash-Box full or not rearmed'?
If your MEI Cash Register indicates 'Cash-Box full or not rearmed', you should empty the cash-box and rearm it. Consult the 'CASH-BOX HANDLING' documentation for detailed instructions.
What to do if the MEI BNR3-20M is not operational due to a wrong module, OOS, or transport error?
If your MEI Cash Register is 'Not Operational (wrong module, OOS, transport error)', a 'Reset' command is required.
What to do if the MEI Cash Register transport stopped, bill error?
If the MEI Cash Register's transport has stopped and a bill error has occurred, clear the jam. Refer to 'EASY JAM CLEARING' or the Service Manual for detailed instructions.
What to do if MEI Cash Register shows 'Bill Storage not OK (Loader only)'?
If your MEI Cash Register displays 'Bill Storage not OK (Loader only)', take no action, the CB is ready to insert.
Explains how to secure the BNR/BNA6 using Interlock System, locks, and levers for cash modules.
Provides instructions for removing, opening, emptying, and rearming the Cash-Box module.
Step-by-step guide to clearing a banknote jam within the Spine module.
Instructions for removing jammed banknotes from the Recognition Sensor area.
Procedures for clearing jams located between the Recognition Sensor and the Spine.
Steps to clear banknotes jammed in the Positioner or at the Inlet.
Guidance on how to clear jams occurring within the Loader Cassette.
Instructions for removing jammed banknotes at the Cash-Box Pusher Plate.
General| Model | BNR3-20M |
|---|---|
| Manufacturer | MEI |
| Power Supply | 12VDC |
| Interface | MDB |
| Display | LED |
| Printer Type | Not applicable |
| Cash Drawers | Not applicable |
To Next Page
