What to do if the MEI Cash Register displays 'Cash-Box full or not rearmed'?
If your MEI Cash Register indicates 'Cash-Box full or not rearmed', you should empty the cash-box and rearm it. Consult the 'CASH-BOX HANDLING' documentation for detailed instructions.
What to do if the MEI Cash Register is not operational due to a wrong module, OOS, or transport error?
If your MEI Cash Register is 'Not Operational (wrong module, OOS, transport error)', a 'Reset' command is required.
What to do if the MEI BNR4-10 Cash Register transport stopped, bill error?
If the MEI Cash Register's transport has stopped and a bill error has occurred, clear the jam. Refer to 'EASY JAM CLEARING' or the Service Manual for detailed instructions.
What to do if MEI BNR4-10 shows 'Bill Storage not OK (Loader only)'?
If your MEI Cash Register displays 'Bill Storage not OK (Loader only)', take no action, the CB is ready to insert.
General| Printing Method | Direct Thermal |
|---|---|
| Paper Width | 80 mm |
| Paper Roll Diameter | 83 mm |
| Interface | USB, Serial, Ethernet |
| Power Supply | 24V DC |
| Type | Receipt Printer |
| Resolution | 203 DPI |
Covers essential safety precautions, heavy material warnings, and hot surface alerts.
Details product compliance with relevant European directives and standards for safety and EMC.
Introduces the BNR/BNA6, its basic functions, and operational concepts.
Describes the various modules that compose the BNR/BNA6 unit.
Explains the external illuminated arrows on the bezel of the main module.
Describes the front-located LED indicators that provide module status.
Details the LED indicator on the Spine that displays its operational status.
Details the locking mechanisms and security principles for accessing cash modules.
Provides instructions for handling, opening, closing, and rearming the cash-box.
Guides on filling, opening, closing, and inserting the loader cassette with banknotes.
Explains how the host machine configures BNR/BNA6 functions like denominations.
Describes the self-test process during power-up and the system reset sequence.
Details the meaning of LED indicators on the bezel for system and module status.
Provides a guide to diagnose issues based on external indicator status and module states.
Step-by-step guide to remove jammed banknotes from the spine area.
Instructions for removing jammed banknotes from the recognition sensor area.
Procedure to clear banknotes jammed between the sensor and spine.
Guidance on removing jammed banknotes at the positioner and inlet.
Steps to clear banknotes jammed within the loader cassette.
Instructions for removing banknotes jammed at the cash-box pusher plate.
Outlines the recommended maintenance frequency and plan for optimal performance.
Provides instructions for cleaning the bill path using compressed air.
Details the procedure for cleaning the loader cassette, including equipment needed.
Provides a form for documenting intervention details, problems, and repair status.
Illustrates different bezel types available for the BNR/BNA6 units.
Shows different cash-box models with their capacities.
Presents various BNR unit models with their specific designations.
Displays different BNA6 unit models with their designations.
To Next Page
