MEI Cashflow SC83 Series User Manual

MEI CASHFLOW SC83 Page-1
www.meigroup.com Part # 252055088 G6
MEI Cashflow SC83
®
/ SCN83
®
Installation & Operation Manual
2011

MEI Inc. All Rights Reserved.
The MEI device, MEI CASHFLOW, MEI EASITRAX and SODECO are registered trademarks of MEI in the U.S. and other
countries. Information is subject to change without notice. MEI has made every effort to assure that the information in this
document is accurate. However, we cannot be held responsible for any errors or omissions.

MEI Cashflow SC83 Series Specifications

General

Dimensions	104 mm x 254 mm x 229 mm (4.1" x 10" x 9")
Weight	Approx. 2.0 kg (4.4 lbs)
Power Supply	12VDC or 24VDC (depending on model)
Display	Not applicable (bill acceptor, not a full cash register)
Printer	Not applicable (bill acceptor, not a full cash register)
Print Speed	Not applicable (bill acceptor, not a full cash register)
Memory	Not specified (typically stores configuration and validation data)

Summary

INSTALLATION

Installing the Chassis

Provides instructions on mounting the chassis to the host machine and grounding considerations.

Inserting and Removing the Acceptor Module

Details the procedure for attaching and detaching the acceptor module from the chassis.

Installing a Bill Entry Guide

Installing and Removing the Cashbox

Guides users on how to properly install and remove the cashbox from the chassis.

Installing Cashbox Locks

STS SUPPORT TOOL

STS Tool Functions

UPDATING SOFTWARE

Portable Programming Module (PPM)

Explains the use of the PPM for updating software via USB connection.

CPM Downloading Procedure

Details the steps for performing software downloads using the PPM and interpreting LED codes.

Replacing the Programmed PROM (Chip Change)

Provides instructions for replacing the PROM chip to update or change the unit's firmware.

HARNESSING AND CONNECTORS

EBDS Interface Pin Out

MAINTENANCE

Cleaning the Acceptor Module

Provides step-by-step instructions for cleaning the internal components of the acceptor.

TROUBLESHOOTING

Diagnostic Codes

Explains LED indicator codes for diagnosing faults and their corresponding corrective actions.