MEI EC6000 - User Manual

EC6000 Changegiver - Operators Guide

MEI, 2008 Page 1 Rev: G2
EC6000 CHANGEGIVER - OPERATORS GUIDE
OVERVIEW
1. The Reject Lever is used to open the
Discriminator to clear obstructed coins.
2. Discriminator and Separator assembly – this
part checks whether a coin is accepted or not
and then the Separator routes it to the
3. MMI – (Man Machine Interface) contains
buttons for configuring the unit and three LEDs
allow troubleshooting whether they are lit or
flashing.
4. Cassette – used for coin storage.
5. Dispenser Module – used to dispense coins
from the cassette tubes.
6. Discriminator/Separator Assembly Release
button.
CASSETTE REMOVAL
1. Lift black Release mechanism.
2. Tilt cassette forward and lift out.
CASSETTE FILLING
Press Button
Sequence
Description / (Action)
Float coin tubes / (Insert coins then press button)
Coins must be inserted through the EC6000 Validator.
A
4
3
5
2
1
6

Summary

EC6000 Overview

Reject Lever

Used to open the Discriminator to clear obstructed coins.

Discriminator and Separator Assembly

Checks coin acceptance and routes it to the MMI for processing.

MMI (Man Machine Interface)

Contains configuration buttons and troubleshooting LEDs.

Cassette

Component used for the storage of coins.

Dispenser Module

Dispenses coins from the cassette tubes.

Cassette Removal Procedure

Coin Jam Troubleshooting

Cleaning Procedures

MEI EC6000 Specifications

General

Brand	MEI
Model	EC6000
Category	Cash Counters & Coin Sorters
Language	English