EasyManua.ls Logo

MEI CASHFLOW 952 Series User Manual

MEI CASHFLOW 952 Series
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MEI., 2003 Rev: G2
CASHFLOW
®
952X / 952Xe / 9510
SELECTOR SYSTEMS
USER GUIDE

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the MEI CASHFLOW 952 Series and is the answer not in the manual?

MEI CASHFLOW 952 Series Specifications

General IconGeneral
BrandMEI
ModelCASHFLOW 952 Series
CategoryCash Counters & Coin Sorters
LanguageEnglish

Summary

SAFETY

General Safety Precautions

Covers warnings, cautions, operating voltage, environments, and disposal guidelines.

PRODUCT FEATURES

INSTALLATION

Side Entry Mounting

Instructions for installing the validator using the side entry method.

Top Entry Mounting

Instructions for installing the validator using the top entry method.

ACCEPTANCE TEST

Post-Installation Checks

Checks to ensure power is on and the validator lid functions correctly.

Coin/Token Acceptance Testing

Procedure for testing coin/token recognition using LED feedback.

COIN ROUTING CF952X/CF952Xe

PRODUCT CONFIGURATION

LED Status Indicators

Explains LED codes for normal operation, coin insertion, and teach modes.

DIL Switch and iButton® Functions

Details LED behavior for DIL switch teach and iButton® programming.

DIL Switch Options for the validator

CF952X DIL Switch Functions

Explains the 8 teach switches for CF952X settings and teach modes.

Power Cycle Requirements

Details when power cycling is needed for teach mode selection.

CF952Xe DIL Switch Configuration

CF952Xe DIL Switch Functions

Covers DIL switch functions specific to CF952Xe, including serial mode.

CF9510 DIL Switch Functions

CF9510 DIL Switch Functions

Explains DIL switch settings for CF9510 output modes and teach functions.

CF952X - SW1 - Alarm Enable

CF9510 - SW1 - Parallel/BCO Mode select

CF952X - SW2 - HII Standalone Mode

CF952Xe - SW2 – Serial Mode Enable

CF9510 - SW2 - Extended Features

SW3 - Enable Coin Teach and SW4 - Inhibit Coin Teach

Coin Teach: Enable/Inhibit

Procedure for enabling or inhibiting specific coins using SW3 and SW4.

Token Teach Procedure

Token Teach Procedure

Steps for teaching Token 1 (SW5) and Token 2 (SW6) to the validator.

SW7 and SW8 – Route Teach

Route Teach Procedure

Procedure for teaching primary, secondary, and tertiary coin routes using SW7/SW8.

CF9510 SW7 Parallel Output Teach

CF9510 SW7 Parallel Output Teach

Configures parallel output modes for CF9510 using SW7, with reject lever controlling output selection.

CF9510 SW8 Multi-pulse Teach

USING THE iBUTTON®

Configuring the iButton®

Using the iButton to Program

Related product manuals