Overview
The TRC Operation and Service Guide
contains important information on
installing, operating and maintaining MEI
TRC Single Price, Micromech and MDB
Coin Changers.
To obtain the best performance from your
coin changer, read through this manual
before installing and using the unit.
These coin changers are designed for use
in the following:
TRC-6000 - 110VDC Micromech Vending
Machine Controller (VMC) applications.
• 115 Volts DC + 20 Volts • 60 Hz 0.10
Amp continuous • 1.2 Amp peak
(when
dispensing coins)
TRC-6010 - 24VDC Micromech Vending
Machine Controller (VMC) applications.
(12 pins) • 24 Volts DC + 20 Volts • 60 Hz
0.10 Amp continuous • 1.2 Amp peak
(when dispensing coins)
TRC-6010XV - 24VDC Micromech
Vending Machine Controller (VMC)
applications. (15 pins) • 24 Volts DC + 20
Volts • 60 Hz 0.10 Amp continuous • 1.2
Amp peak
(when dispensing coins)
TRC-651x - 34VDC MDB applications.
• 34 Volts DC +20 Volts • 60 Hz 1.0 Amp
continuous • 3.2 Amp peak
(when
dispensing coins)
TRC-6800 - Single Price Vendors. • 115
Volts AC +20 Volts • 60 Hz 0.10 Amp
continuous • 1.2 Amp peak
(when
dispensing coins)
Product Summary
Electronic Coin Recognition
The TRC coin changer maximizes the
acceptance of valid coins, and minimizes
acceptance of slugs. As coins are inserted,
the TRC coin changer adjusts the coin
tracking parameters to maintain the
optimal operating range.
General Information
To ensure continued peak performance after module
replacement, the changer features a special tuning mode
(see Tuning, page 13).
Figure 1: TRC Coin Changer
Physical Characteristics
Height: 370 mm (14.67") base to top of coin return lever
Width: 136 mm (5.35")
Depth: 76 mm (2.99")
Weight: 2.6 kg (5 lbs. 12 ozs.) in shipping container
Acceptance of U.S. coins
The TRC coin changers (Figure 1) are factory-tuned to
accept U.S. nickels, dimes, quarters, and dollar coins,
and can be re-tuned in the field to accept Canadian coins
(with the exception of the $2 coin).
Acceptance of nickels, dimes and quarters with
dollar coin accept/reject toggle switch
The changer is preset to accept U.S. dollar coins.
2
To Next Page
Loading...
Need help?
General
