Meiko K160 - Short Operating Instructions

Operating Instructions - Control MIKE 3 - CE
Datei:BA_MIKE3-CE_KUNDE_9652929_EN_2008-06.docx Update:2009-12-19 MRL 9652929
3/14
We reserve the right to change execution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
1 Short operating instructions
Open the stop valve in the water
pipe.
Switch on the power supply
from the building.
Membrane
keypad
Meaning
Display
Starting condition: Machine off!
Machine off
The machine’s wash-tanks are filled and heated
by pressing the ”Filling - Heating“ key.
Filling
The tank heating elements switch on as soon
as, the minimum water level has been reached.
Filling / Heating
WT1 45°C KSP1 80°C
As soon as all the tanks are full, the display
shows:
Heating
WT1 45°C KSP1 80°C
The machine is “ready for operation” as soon
as, the required tank temperature is reached.
Ready for operation
WT1 65°C KSP1 82°C
Washing is started by pressing the “Wash“ key.
Operation
WT1 65°C KSP1 82°C
The programme selection buttons ( I – II )
currently have no function.
Washing is interrupted by pressing the “Pause
Wash“ key.
The display shows:
Ready for operation
WT1 65°C KSP1 82°C
The machine is switched off by pressing the
“Machine Off“ key.
Machine off
Switch the power supply from the building off.
Clean the machine.
See the“Cleaning“ chapter in the machine’s Operating Instructions.