Need help?Do you have a question about the Meiko TopLine 40 and is the answer not in the manual?
General| Basket size | 500 x 500 mm |
|---|---|
| Dimensions (W x H x D) | 600 x 820 x 600 mm |
| Type | Undercounter Dishwasher |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Dimensions (WxDxH) | 600 x 600 x 820 mm |
| Theoretical basket capacity | 40 baskets/hour |
| Capacity | 40 plates |
| Water Consumption | 2.6 liters/cycle |
| Wash cycle times | 90 / 120 / 180 s |
Details warning categories and signal words used in the manual.
Explains symbols used for instructions and their results.
Discusses the absence of targeted non-ionizing radiation from the machine.
Specifies responsibilities and training requirements for personnel.
Details EMC standards and potential interference.
Explains how to identify the machine model for queries.
Lists improper uses of the cleaning and disinfection machine.
Details what the machine cleans and disinfects, and the program steps.
Describes different cleaning programs and their uses.
Step-by-step guide for operating the standard model.
Instructions on how to stop an ongoing program.
Operation guide for the rim flushing option.
Operation guide for wash chamber rinsing option.
Operation of automatic door opening features.
Operation guide for machines with code input for door access.
Explains information displayed on the machine's screen.
Details the factory setting for the A0 disinfection parameter.
How to select and adjust the A0 disinfection value.
Step-by-step guide for replacing dosing agents.
Procedure to access the machine's service level menu.
How to view and modify service parameters.
Procedure to ventilate the rinse agent inlet.
Procedure to ventilate the detergent inlet.
How to set the machine's date and time.
Instructions for opening or unlocking the machine door.
How to customize the initial fault display text.
Explains the importance of regular maintenance and services.
How to interpret the next maintenance indicator.
Operator's role in validating cleaning and disinfection process output.
Daily checks to be performed before operating the machine.
Daily cleaning procedures for the machine's exterior and interior.
Lists common warnings and their required measures.
Details specific error codes, their meanings, and solutions.
References the separate declaration document.
To Next Page
