Need help?Do you have a question about the Meinberg LANTIME/GPS and is the answer not in the manual?
Details on interacting with the LANTIME via serial, web, and Telnet/SSH interfaces.
Lists optional hardware and software features for the LANTIME system.
Explanation of NTP's hierarchy, synchronization, and precision capabilities.
Hardware specifications and basic features of the GPS167 receiver.
How LANTIME handles time zones and daylight saving time adjustments.
Instructions for connecting the GPS antenna and handling short-circuit conditions.
Describes the boot process of the LANTIME's internal computer system.
Lists available methods for configuring LANTIME: CLI, HTTP, HTTPS, LCD, SNMP.
Details on LEDs, LC Display, and front panel buttons (MENU, CLR/ACK, NEXT, INC).
Explains the root menu and submenus for receiver position and satellite constellation.
Configure enabling of serial ports, pulse outputs, and frequency synthesizer.
Selects the format of serial time strings for each serial port.
Enables/disables running LANTIME without antenna connection.
Configures antenna cable length and resets unit to factory defaults.
Accessing LANTIME configuration via a web browser.
Managing LANTIME via Telnet or SSH sessions.
Configuring IPv4, IPv6 addresses, DHCP, and High Availability Bonding.
Setting up email, popup, SNMP, and display alarms for system events.
Managing passwords and controlling HTTP/HTTPS access.
Configuring SSH access, SSL certificates, and NTP keys.
Configuring SNMP agent and community strings for network management.
Securing NTP communication using symmetric keys and AUTOKEY.
Rebooting, manual configuration, test notifications, and factory resets.
Procedures for updating software and gathering diagnostic information.
Viewing synchronization status, system information, and NTP client lists.
Configuring Ethernet, Notification, Security, NTP, and Local settings via CLI.
Using SNMP to configure LANTIME, including examples and MIB details.
List and description of available SNMP traps for LANTIME events.
Details on LANTIME Multipac, safety, CE label, and battery replacement.
Pinout details for RJ45, DFK, SUB-D, and other connectors.
Electrical specifications for the Time Sync Error Relay output.
Accuracy specifications for frequency TCXO quartz and oscillators.
Signal descriptions, pin assignments, and connector details for the antenna.
Pinouts for LAN CPU rear connectors, including Ethernet, RS232, VGA, and Keyboard.
Overview of timecode generation, including IRIG, AFNOR, IEEE1344 formats.
Description of AM Sine Wave and PWM DC signal outputs.
Using USB stick for config transfer, keypad locking, software updates, and file management.
Details on Meinberg, GPS167, SAT, Uni Erlangen, NMEA, ABB SPA, and COMPUTIME string formats.
Information on GNU/Linux (GPL) and Samba licenses.
Details on NTP project and mini_httpd web server.
To Next Page
General