Need help?Do you have a question about the Meinberg LANTIME M150/GPS and is the answer not in the manual?
General| Type | NTP Time Server |
|---|---|
| Time Source | GPS |
| Network Interfaces | Ethernet |
| Number of Ethernet Ports | 2 |
| Synchronization | NTP, PTP |
| Power Supply | 100-240 VAC |
| Form Factor | 1U |
| Temperature Range | -20°C to +70°C |
| Operating Temperature | 0°C to 50°C |
| Humidity | 5 to 95 % (non-condensing) |
| Dimensions | 19" rack mount (1U) |
| Storage Temperature | -20°C to 70°C |
Explains warning boxes, signal words, colors, and symbols for critical safety warnings.
Describes secondary symbols used to emphasize the nature of hazards or risks in warning boxes.
Details warning and information boxes for product damage, data loss, security breaches, and general information.
Lists and explains symbols and pictograms used throughout the manual and on the product.
Specifies that the device must be used according to product documentation and within specified limits.
Intended readers, understanding safety information, and accessing up-to-date manuals.
Covers rack mounting, environmental conditions, fire safety, and mechanical stress protection.
Covers hazardous voltage, connection by skilled persons, cable safety, AC/DC power specifics, and thunderstorm precautions.
Specifies using dry cloths, not opening components, and handling hot surfaces with care.
Details handling of CR2032 battery, replacement procedures, and improper handling risks.
Declares product compliance with EU directives for the Single Market.
Declares product conformity with UK statutory instruments for the United Kingdom market.
Ensures ventilation is clear and the device housing is fully assembled for proper cooling and EMC.
Recommends backing up configuration data before performing maintenance or modifications.
Details symptoms of battery failure and advises contacting technical support for replacement.
Provides instructions and safety warnings for replacing fuses for AC and DC power supplies.
Covers disposal of packaging materials and the device according to WEEE Directive.
Details mounting the antenna, connecting the cable, and installing surge protectors.
Explains connecting the surge protector to a grounding busbar using a grounding conductor.
Describes connecting multiple receivers to one antenna using an antenna splitter.
Explains entering antenna cable length or offset time for signal propagation delay compensation.
Details the 5-pin MSTB connector pin assignment and power supply specifications.
Describes the 5-pin DFK connector, input parameters, and output specifications for DC power.
Provides technical specifications for the fuse and safety warnings related to its replacement.
Explains the meaning of the Init, Signal, Antenna, and Fail LEDs for the receiver module.
Details establishing a serial terminal connection via the CONSOLE RJ45 connector for configuration.
Describes the uses of the USB interface for storage media, configuration backup, and firmware updates.
Specifies technical details of the antenna input, receiver type, signal support, and connection types.
Provides specifications for the 1000BASE-T Gigabit network port, including data rate and connection type.
Details chassis construction, material, temperature range, humidity, altitude, acoustics, and IP rating.
Explains wiring the external ground terminal to a bonding busbar for chassis grounding.
Provides technical specifications for the GPS antenna, including voltage, power, frequency, IP rating, and dimensions.
Details specifications, features, and installation methods for the MBG S-PRO surge protector.
Shows the physical dimensions of the MBG S-PRO surge protector.
Illustrates the installation and grounding procedure for the MBG S-PRO surge protector.
Provides a table of coaxial cable types, lengths, and their attenuation properties for receiver compatibility.
Explains the principles of satellite navigation, propagation delay measurement, and satellite systems (GPS, GLONASS, BeiDou, Galileo).
Explains GPS System Time, UTC, leap seconds, and automatic Daylight Saving Time adjustments.
To Next Page