Meinberg microSync 10 Series - Page 63

Effects of permissions on configuration via Meinberg Device Manager:
Read State Read Configuration Write Configuration
Database No effect Function ”Show GNSS
Statistics” enabled
No effect
Firmware Not available /configuration/firmware
displayed
/configuration/firmware
modifiable
IO Ports /state/IOPorts displayed /configuration/IOPorts
displayed
/configuration/IOPorts
modifiable
Monitoring /state/monitoring
displayed
/configuration/monitoring
displayed
/configuration/monitoring
modifiable
Network /state/network displayed /configuration/network
displayed
/configuration/network
modifiable
NTP /state/NTP displayed /configuration/NTP
displayed
/configuration/NTP
modifiable
Password Not available Not available No effect
PTP No effect No effect No effect
Receiver /state/clock/satellites,
/state/clock/clock
and /state/clock/overview
displayed
/configuration/clock/clock
displayed
/configuration/clock/clock
modifiable
Ref.Sources /state/references displayed /configuration/references
displayed
/configuration/references
modifiable
Sensors /state/sensors displayed Not available Not available
Table: Read/Write Permissions
58 Date: January 19, 2023 microSync