8.4.3 Configuration - NTP
This subsection provides the means to configure your meinbergOS device’s NTP functionality. The type and
number of configurable parameters depends on the module or device selected.
Server: This is where the meinbergOS device is configured in relation to how it operates
as an NTP server.
Client: This tab provides configuration options for the meinbergOS operating as an NTP
client or peer.
Symmetric Keys: Configuration options for NTP server/client authentication using symmetric
MD5, SHA-1 and AES-128-CMAC keys are provided here.
Extended Configuration: This tab provides a text editor for entering custom NTP configuration
parameters.
92 Date: January 19, 2023 microSync
To Next Page
