To Next PageTo Next Page
Need help?Do you have a question about the Melco EMT16 and is the answer not in the manual?
Step-by-step guide for threading the bobbin case correctly.
How to test and adjust the bobbin tension for optimal sewing.
Proper positioning and selection of needle sizes for embroidery.
Overview of different needle points and coatings like Titanium.
Guide to selecting the appropriate needle for different fabrics and threads.
Step-by-step instructions for safely replacing an embroidery needle.
Common indicators and reasons for replacing a needle.
Information on cut away and tear away backing materials.
Details on mesh backings and water-soluble materials.
In-depth look at tear away and cut away backing properties and uses.
How to use toppings to improve stitch quality on lofty fabrics.
Explanation of keypad buttons for machine operation.
How to use the keypad to control the laser alignment feature.
Steps for loading and preparing a design for embroidery.
Key operational steps before starting embroidery.
Detailed steps for adjusting the presser foot height on the machine.
Advice for successfully hooping garments for embroidery.
Solutions for thread breaks, bobbin issues, and puckering.
Steps for sewing appliqué designs, including locator and tack-down stitches.
Explanation of Pause, Puff, Micro Chenille, and Recursive commands.
Details on Melco condensed and DesignShop file formats.
Information on expanded and Tajima stitch files and scaling.
Steps to load, set up, and sew designs on caps.
Key measurements and safe zones for accurate cap embroidery.
Guidelines for evaluating and using 3-D foam in embroidery.
How to digitize designs for puff embroidery, including stitch settings.
Techniques for embroidering puff designs and using commands.
How to handle foam, match thread colors, and care for puff embroidery.
Methods for closing open satin stitch ends for puff embroidery.
How to move to specific stitches or colors within a design.
How to align embroidery designs using the machine's laser feature.
Different methods for setting reference points for laser alignment.
General