8 | P a g e
Step 4
Fit SHELF (D) over the top of the 4 poles and over SLIP SLEEVES (E).
Repeat STEPS 3-4 for remaining shelves. Place LINERS (K) into shelves to finish.
.
Assembling 2 Units
STEP 1. Screw THREADED INSERT (J) into base of TOP POLES (B).
STEP 2. Screw LEVELING FEET (F) and WHEELS (G, H) into bases of POLES (A, B).
STEP 3. Snap SLIP SLEEVES (E) around grooves. Fit SHELF (D) over the top of the 4
poles and over SLIP SLEEVES (E).
STEP 4. Insert CAPS (I) to top of BOTTOM POLES (B).
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
To Next Page
Loading...
