Why are the flames low or won’t stay lit on my Member's Mark Indoor Furnishing?
If the flames are low or the fire won't stay lit in your Member's Mark Indoor Furnishing, it might be because the manual shutoff valve is not correctly installed or open between the LP tank and the appliance. To resolve this, close both the LP tank and manual shutoff valves, then open the LP tank valve first, followed by the manual shutoff valve.
How to fix a Member's Mark FRM10390SST fire that won’t light?
If the fire won’t light on your Member's Mark Indoor Furnishing, begin by checking the LP (propane) tank to ensure it's not empty, or check the Natural Gas valve at main. Also, inspect the burner orifice for any blockages and remove them to ensure proper gas flow.
What to do if Member's Mark FRM10390SST Indoor Furnishing has blue flames?
If you observe blue flames on your Member's Mark Indoor Furnishing, it might be due to an improper air/fuel mixture related to the air shutter position. Try closing the air shutoff. For LP, leave it 1/4” open; for natural gas, leave it 1/16” open.
Why are the decorative beads cracking or splitting in my Member's Mark FRM10390SST Indoor Furnishing?
Cracking or splitting of decorative beads in your Member's Mark Indoor Furnishing may occur due to heat and/or abrupt temperature changes. This is a normal property of glass, so no action is required.
General| Type | Folding Table |
|---|---|
| Color | Stainless Steel |
| Material | Stainless Steel |
| Table Top Material | Stainless Steel |
| Table Top Color | Stainless Steel |
| Frame Color | Stainless Steel |
| Foldable | Yes |
| Portable | Yes |
| Product Type | Table |
| Table Height | 29 inches |
| Warranty | 1 Year Limited Warranty |
To Next Page