To Next Page
C
Christine TerrellAug 5, 2025
Why won't the burners light on my Member's Mark G70302-1 Griddle?
- JJames DavisAug 5, 2025
If the burners on your Member's Mark Griddle won't light, even with the igniter or a match, several factors could be at play. First, ensure a solid connection exists between the propane tank and the regulator. Check that you have sufficient propane or that the tank isn't empty. Verify the gas supply valve is open. Make sure the burners are correctly positioned over the valve orifices. Finally, the flow limiting device in the regulator might have been activated; in that case, see the section on resetting the regulator flow limiting device.
General
