OPERATION
18
Press the REC/STOP button and the REC
indicator will light and the elapsed time will
appear. Speak into the built-in microphone
or insert a microphone into the MIC jack and
when the unit picks up sound, it will record.
When not recording, the REC indicator will
blink and PAUSE will blink in the display
until sound is detected. Press the
REC/STOP button again to stop recording.
3
NOTES:
• The first few sounds activate the recorder and
may not be recorded.
• A variation in voice level during recording will not
stop the unit, two seconds of silence is required
to stop the recording.
• For constant recording, see page 15.
• To pause, press the MODE/PAUSE button.
• The built-in audio level automatically sets the
recording level.
• For normal voice levels, a distance of 5-9
inches is appropriate.
To Next Page
Loading...
Need help?
General
