8
OPERATION (CONTINUED)
TO SET THE ALARM TO WAKE TO RADIO
Set the alarm time as previously
instructed. Slide the FUNCTION
switch to the ON position.
1
Slide the Band switch 1 to the AM or
FM position, then tune a station using
the TUNING control 2. Make sure the
VOLUME control
3 is set as desired.
2
Slide the FUNCTION Switch to the
RADIO position.
3
Slide the Alarm switch to the 1, 2 or
1+2 position. Select 1+2 to activate
both alarms. When the actual time
matches the selected preset alarm
time(s), the unit automatically turns
on.
To shut off the alarm, see TO SHUT
THE ALARM OFF section on the next
page.
4
NOTE: Please make sure the volume is not set to the minimum, otherwise, when
it reaches the alarm time, you will not hear the radio sound.
To Next Page
Loading...
