Memorex MP3134BLU - Operation - Programming CD Memory; Setting Up Track Programming; Initiating Programmed Playback

OPERATION (CONTINUED)
11
Slide the Function switch to the CD
position to turn the unit on and select
CD mode; the POWER indicator will
light. Insert a CD as described on
page 9.
1
1
1
Press the PROGRAM button; the dis-
play and the PROGRAM indicator will
blink.
2
1
2
Use the Skip/Search o 1 or n 2 but-
ton to select the first track to be pro-
grammed.
2
1
3
Press the PROGRAM button again;
the selected track has now been pro-
grammed and counted as program 1.
2
1
4
Repeat steps 3 and 4 to program the
other desired tracks in sequence.
When the program memory is full, it
will start over at memory 1.
2
1
5
Press the PLAY/PAUSE (®/p) button
to begin playback; the PROGRAM
indicator will light and the tracks will
play in the order programmed.
2
1
6
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
SEE NEXT PAGES FOR NOTES ON PROGRAMMED PLAY