Memorex MP3142 - Operation: Setting the Clock

8
OPERATION
Make sure the Function control is set
to OFF or CD.
1
1
1
Press and hold the CLK SET button
1. Set the correct hour (and AM/PM)
using the Skip/Search ( )/H (Hour)
button
2.
2
1
2
Continue holding the CLK SET button
1. Set the correct minute using the
Skip/Search ( )/M (Minute) button
2.
Release the CLK SET button
1 and
the time will be set.
2
1
3
SETTING THE CLOCK
NOTE:
If there is a power failure and if there is
no power supply to the unit (for several
minutes), then the clock will be reset.