EasyManua.ls Logo

Memorex MPJ300 - Projector Setup; Power; Projector Placement

Memorex MPJ300
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Projector Setup
Power
Plug the AC/DC power adapter (included) into a standard wall outlet and
the DC power input on the rear of the unit. After connecting power, please
allow approximately 5 seconds to pass before powering the unit ON.
THE CENTER OF LENS
SCREEN
72
"
60
"
50
"
45
"
37
"
Projector Placement
For best results, place the projector in a dark room or other dimly lit area. Use the unit with a
dedicated projector screen for best picture resolution. A variety of screens and screen sizes can be
used. If placing the projector behind the viewing screen (unit in front of/projecting toward viewers),
a special screen will be required (not included). If no screen is available, a smooth, white or lightly
colored surface will provide the best results.
The projector can
display up to 150"