17
Audio/Video Input
Requires a 3.5mm to RCA audio/video cable (included).
1. Connect the 3.5mm to RCA audio/video cable to the AV input on the unit.
2. Connect the 3.5mm to RCA audio/video cable to the RCA stereo audio outputs and composite
video output on the media player.
3. Set the projector's Source to AV and use the controls on the connected player to select and
play media.
Connect AV cable (included)
to media player's AV
outputs.
Audio Left Channel - White
Audio Right Channel - Red
Video - Yellow
AV IN
R
AUDIO OUT
L VIDEO
VIDEO OUT
To Next Page
Loading...
General