Memorex MX4302 - Setting Radio Presets; Recalling Radio Presets

10
OPERATING INSTRUCTIONS (CONTINUED)
Press the POWER button to turn
the unit on.
1
Press the MEMORY/CLOCK SET
button ❶. Within four seconds,
press the REPEAT/MEMORY UP
button ❷ repeatedly until the
desired memory number appears
on the display.
2
1
4
Use the TUNING/CD Skip/Search
❶ or ❷ button to select a
station.
1
2
3
Press the TUNER Function button
❶ ; the RADIO indicator will
appear in the display.
Press the STOP (■ )/BAND
button ❷ to select the desired
band - FM or AM.
2
1
2
Press the MEMORY/CLOCK SET
button again to set the station in
the selected memory.
5
Repeat steps 3 through 5 to
program up to 10 stations in each
band, if desired.
In case the main power supply
is interrupted, the memory
presets will be erased.
35
6
SETTING RADIO PRESETS
This unit can preset 10 AM and 10 FM radio stations for convenient recall.
Follow steps 1 and 2 above.
12
1
Adjust the PRESET EQ ❶ and
VOLUME ❷ buttons as desired.
1
2
2
3
Press the REPEAT/MEMORY UP
button to select a preset; the
station will automatically be tuned
in.
2
RECALLING RADIO PRESETS
MX4302.O/M.QXD 3/4/03 7:47 AM Page 10