Memorex MX4302 - Setting the Clock

SETTING THE CLOCK
7
OPERATING INSTRUCTIONS
With the power off, press and
hold the MEMORY/CLOCK SET
button; “24H” will blink.
1
Press the MEMORY/CLOCK SET
button and the hours will blink.
3
Press the TUNING/CD Skip/
Search ❶ or ❷ button to
set the unit to the 24 hour (24H)
mode (also known as military
time), or 12 hour (12H) mode.
1
2
2
Press the TUNING/CD Skip/
Search ❶ or ❷ button to
set the current hour, then press
the MEMORY/CLOCK SET
button ❸ again; the minute digits
will blink. If you selected 12H time
display be sure to observe the AM
or PM indicators to make sure
you have set the hour correctly.
1
2
3
4
Press the TUNING/CD Skip/
Search ❶ or ❷ button to
set the current minute. Press the
MEMORY/CLOCK SET button ❸
and the time will be set.
1
2
3
5
MX4302.O/M.QXD 3/4/03 7:47 AM Page 7