The MEMORISM Hair Clipper Set, Model: CS7, is a versatile grooming tool designed for personal hair care. This user manual provides comprehensive instructions for its operation, maintenance, and safety, ensuring optimal performance and longevity.
Function Description
The MEMORISM Hair Clipper Set is primarily designed for trimming human hair. It features a robust motor and a combination of stainless steel and ceramic blades, engineered for precise and efficient cutting. The clipper offers adjustable cutting lengths and multiple speed settings, allowing users to achieve various hairstyles and lengths with ease. It is a cordless device, powered by a rechargeable Lithium-ion battery, offering flexibility and convenience during use. The set also includes a charging base for easy recharging and storage.
Usage Features
The clipper is designed for intuitive and user-friendly operation.
- Power On/Off and Speed Adjustment: The device is turned on with a single press of the one-touch switch. To turn it off, the button needs to be held for 2 seconds. The same one-touch switch is used to adjust the cutting speed. Each press cycles through different speed settings, ranging from 5.0K RPM to 7.0K RPM in 0.5K RPM increments.
- Cutting Length Adjustment: The clipper features an adjustable blade length mechanism. A dedicated adjust switch allows users to set the blade length to 2.4mm (Left), 1.6mm (Mid), or 0.8mm (Right). The shortest haircut length achievable with the bare blade is 0.8mm.
- Guide Combs: For longer cutting lengths, the set includes four guide combs: 3mm, 6mm, 9mm, and 12mm. To attach a guide comb, users grab its sides, align it with the blade, and press until it clicks into place. Removing a guide comb involves pulling the snap tab on its back and sliding it out. It's crucial not to press the comb teeth during removal to prevent damage.
- Blade Removal and Installation: The blade can be easily removed for cleaning or replacement. To remove, the adjust switch is pressed to the bottom, and the main body is held while pushing the blade away with the thumb. For installation, the straight shaft is rotated to the middle position, the bottom of the blade is inserted into the designated slot, and the blade is pressed down until it clicks into place.
- LED Indicator Description: The clipper is equipped with an LED display that provides essential information:
- Constant Speed: Indicates the current operating speed in RPM.
- Level: Shows the current speed level (1-5), corresponding to RPMs from 5.0 to 7.0.
- Available Time: Displays the remaining operating time in minutes, indicating the battery charge level.
- Oil Reminder: After 120 minutes of cumulative use, an oil indicator will flash for 30 seconds, reminding the user to oil the cutter blades for optimal performance.
- Charge Reminder: When the available operating time drops below 18 minutes, the charging indicator will flash, prompting the user to recharge the clipper.
- Charging Methods: The clipper offers two charging options:
- Direct charging: The charger can be inserted directly into the bottom socket of the clipper.
- Charging base: The hair clipper can be placed into the charging base, and then the charger is inserted into the charging base.
- It's important to note that the clipper must be turned off to charge. The charging indicator flashes when the battery is low and remains on during charging. A full charge takes 3 hours and provides 4 hours of cordless use. If the clipper hasn't been used for a month or longer, a 3-hour recharge is recommended. The clipper can also be used while connected to the charging cable if the battery is depleted.
Maintenance Features
Proper cleaning and maintenance are crucial for the clipper's performance and longevity.
- Cleaning: After each use, the clipper should be turned off, and any hair trimmings should be brushed off the main body and around the blade using the included cleaning brush. The blade can then be removed and cleaned under running water.
- Oiling: After cleaning and drying the blade, it is essential to drop oil onto the cutters at the specified points. Frequent oiling is highlighted as important for good and long-lasting cutting performance.
- Blade Installation after Cleaning: When reinstalling the blade after cleaning, users are reminded to adjust the blade to 0.6mm before attaching it to the clipper.
- General Care: The manual provides several warnings to ensure the device's safety and durability:
- Do not disassemble the main body.
- Avoid cleaning the product with chemicals.
- Do not store the clipper in extreme temperatures (above 104°F or under 32°F).
- Do not immerse the main body in water; instead, wipe it with a soft and slightly damp cloth.
- Prevent any liquid from getting inside the appliance.
The MEMORISM Hair Clipper Set is designed to be a reliable and easy-to-maintain grooming tool, providing users with a comfortable and effective hair cutting experience.
Need help?
General
To Next Page