CLEANING AND MAINTENANCE
DANGER
www.mymemorism.com
07
1 Do not disassemble the main body.
2 Do not clean the product with chemicals.
3 Do not store in temperatures above 104ºF and under 32ºF.
4 Do not immerse the main body in water. Use a soft and slightly
damp cloth to wipe the main body.
5 Do not allow any liquid to get inside the appliance.
1 Turn off the Clipper and brush off any hair trimmings from the
main body and from around the blade.
2 Remove the blade and clean the blade under running water with
the cleaning brush after each use.
3 Dry the blade and drop oil on to the cutters by the points.
*For a good and long-lasting cutting performance it is important to oil the
cutters frequently.
4 Install the blade to the clipper. Remember to adjust the blade to
0.6mm before installing the blade.
To Next Page
Loading...