MEMUP KOON - Equalizer Setting; Play Mode Setting; Contrast Setting; Backlight Time Setting

6
User instruction details
• “Equalizer” setting
① System setting, press“-/+”key to choose “Equalizer” then press “Play” entry “Equalizer” setting;
② Press“-/+”key to choose Equalizer: Normal, Pop, Rock, Classical, Jazz, and Bass.
③ Press “Mode” for confirmation and exit
• “Play Mode” setting
① System setting, press “-/+” button to choose “Play Mode”, and press “Play” to entry “Play Mode” setting;
② Press “-/+” to choose “Play Mode”: Normal, Repeat one, Repeat all, Shuffle repeat, Dir repeat, Dir all,
repeat Dir
• Random All
Press “Mode” for confirmation and exit.
• “Contrast” setting
System setting, short press “-/+”to choose “Contrast” and press “Play” to entry “Contrast” setting.
Press“-/+”choose Contrast size
Press “Mode” key for confirmation and exit.
• “Backlight” time setting
System setting, press “-/+”to choose "Backlight”, press “Play” to entry “Backlight” setting.
Press “-/+” button to select the “Backlight” time: 5S, 10S, always on.
Press “Mode” button to confirm and exit.
• Power Set
Under System setting interface, press “-/+” to select “Power Set”, and then press “Play” to enter “Power Set”.
Press “-/+” button to select power off time: DISABLE, 2MIN, 10MIN, and 30MIN.
Press “Mode” button to confirm and exit.
• Record Set
Under System setting interface, press “-/+” button to select “Record Set”, and then press “Play’ to enter
“Record Set”.
Press “-/+” button select recording sampling frequency: 32Kbps, 64Kbps, 88Kbps, and 128Kbps.
Press “Mode” to confirm and exit.
• Language Set
Under system setting interface, press “-/+” to select “Language”, and then press “Play” to enter “Language”
setting.
Press“-/+” to select language English, French and so on.
Press “Mode” button to confirm and exit.
• Backlight colour set
Under System setting interface, press “-/+” to select “Backlight colour set”, then select “Play” button to enter
“Backlight colour set”. Red, Green, Blue, Cyan, Purple, Yellow, White, Twinkle slow.
Press “-/+” button to set the backlight: Red, Green, Blue, Cyan, Purple, Yellow, White, Twinkle slow.
Press “Mode” to confirm and exit.