immediately but it is necessary to connue operaon, an adequate temporary soluon shall be used.
This shall be reported to the owner of the equipment so all pares are advised.
Inial safety checks shall include:
-those capacitors are discharged: this shall be done in a safe manner to avoid possibility of sparking;
-that there no live electrical components and wiring are exposed while charging, recovering or
purging the system;
-that there is connuity of earth bonding.
WARN
ING!
Install the unit in rooms which exceed 12 m².
Do not install the unit in a place where inflammable gas may leak.
3. PRODUCT OVERVIEW
3.1 PRODUCT DIAGRAM
1 Control panel 4
Air inlet with air
filter
7
Drain opening with
sealing plug
2
Air outlet with
Adjustable louver
5 Recessed handle 8 Castor
3 Front Panel 6 Air Exhaust
Note: The appearance is only for reference. Please see the real product for detailed informaon.
29
To Next Page
Loading...